JK M4.50 x 0.50 Metric Fine Pitch HSS Hand Taps (Set of 2 Pcs),
Shop all Jk
SKU: CU.TA.HA.00740
Roll over the image to zoom in
Key Features
- Product Type: Hand Taps
- Diameter (mm): 4.50 mm
- Thread: Metric
- Pitch (mm): 0.50 mm
ToolBuy Benefits
- Secure Payments
- Order Tracking (opens in a new tab)
₹752 (Incl. of all taxes)
₹637 + ₹115 GST (18%)
MRP was MRP ₹1,158
Save 45%
Out of Stock
3 Business Days
2
–
Download Product LeafletNot available
Download Jk CatalogueNot available
Download Jk CatalogueNot available
Highlights
JK Taps are straight flute general purpose taps, which can be used for both, machine or hand tapping. These taps are most economical to use on production runs, but are best on materials that produce chips or where the swarf breaks readily. Hand Taps can be supplied in sets of three Taper, Second & Bottom non-serial with thread.
Features:
- Manufactured with premium quality HSS Steel
- Improved cost per component
- Taps are heat treated with advanced heat treatment technology giving it consistent quality
- Taps are produced on advance CNC machines which deliver accurate and consistent geometry.
Tap Drill Size:
| Tap Size (Nominal Dia x Pitch) | Drill Dia (mm) |
| M 3 x 0.35 | 2.70 |
| M 4 x 0.50 | 3.50 |
| M 5 x 0.50 | 4.50 |
| M 6 x 0.75 | 5.30 |
| M 8 x 1.00 | 7.00 |
| M 10 x 1.00 | 9.00 |
| M 10 x 1.25 | 8.80 |
| M 11 x 1.00 | 10.00 |
| M 12 x 1.00 | 11.00 |
| M 12 x 1.25 | 10.80 |
| M 12 x 1.50 | 10.50 |
| M 14 x 1.00 | 13.00 |
| M 14 x 1.50 | 12.50 |
| M 16 x 1.00 | 15.00 |
| M 16 x 1.50 | 14.50 |
| M 18 x 1.50 | 16.50 |
| M 18 x 2.00 | 16.00 |
| M 20 x 1.00 | 19.00 |
| M 20 x 1.50 | 18.50 |
| M 24 x 1.00 | 23.00 |
| M 24 x 1.50 | 22.50 |
| M 24 x 2.00 | 22.00 |
Please Note that Products may differ eg. colour, size from the product Image displayed on website. Kindly check the specifications provided to make better purchase decision.
Specifications
| Diameter (mm) | 4.50 mm |
|---|---|
| Thread | Metric |
| Material | High Speed Steel |
| Pitch (mm) | 0.50 mm |
| Thread Length | 13 mm |
| Overall Length | 53 mm |
| Shank Diameter | 4.00 mm |
| Square (Size: a) | 3.15 mm |
| Square (Length: L2) | 6 mm |
| Tolerence | 6H |
| Standard | IS 6175 Part 2 / Part 3 : ISO 529 : BS 949 Part 1 |
