- The handle is made from high grade CA Plastic which ios non-flammable and unaffected by oil, petrol, grease, water-practically anything.
- The handle can stand any rough use, even hammering.
- The tip is precision - ground to 10° angle, which ensures firm grip in the screw slot.
- Bright & smooth Nickel Chrome plating finish effectively protects blade against corrosion.
- The handle is precisely designed to give comfortable grip even at higher torgue.
- TAPARIA Screwdrivers are generally conform to I.S.844 - 1979
- The blade is made from high grade Silicon - Manganese steel which no other make uses. This steel gives spring effect also.
- The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.
- Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.
- The blade tip is magnetised to lift small screw etc.from confined spaces or to hold the the screw in position.
Minimum Torgue Value In Kg.M:
| Tip Width (mm) |
Tip Thickness (mm) |
Torgue Value |
| 1.6 |
0.4 |
0.02 Kg.M |
| 2.3 |
0.4 |
0.04 Kg.M |
| 3.0 |
0.4 |
0.05 Kg.m |
| 3.5 |
0.5 |
0.09 Kg.M |
| 4.0 |
0.6 |
0.15 Kg.M |
| 4.3 |
0.6 |
0.16 Kg.M |
| 5.0 |
0.6 |
0.18 Kg.M |
| 6.0 |
0.6 |
0.21 Kg.M |
| 5.0 |
0.8 |
0.32 Kg.M |
| 6.0 |
0.8 |
0.39 Kg.M |
| 8.0 |
1.0 |
0.80 Kg.M |
| 8.0 |
1.2 |
1.17 Kg.M |
| 10.0 |
1.2 |
1.46 Kg.M |
| 10.0 |
1.5 |
2.29 Kg.M |
| 13.0 |
1.9 |
4.78 Kg.M |
| 3.0 |
0.5 |
0.08 Kg.M |
Please Note that Product may differ eg. colour, size from the product Image displayed on website. Kindly check the specifications provided to make better purchase decision. M.R.P Prices and specifications are subject to change without notice.
