JK 1/8 Inch BSPT HSS British Pipe Thread Hand Tap (Set of 2 Pcs), 9110596
Roll over the image to zoom in
Key Features
- Product Type: Hand Taps
- Diameter (inches): 1/8 inch
- Thread: BSPT
- Material: High Speed Steel
- Thread per Inch: 28 Inch
ToolBuy Benefits
- Secure Payments
- Order Tracking (opens in a new tab)
₹1,081 (Incl. of all taxes)
₹916 + ₹165 GST (18%)
MRP was MRP ₹1,666
Save 45%
3 Business Days
2
–
Download Product LeafletNot available
Download Jk CatalogueNot available
Download Jk CatalogueNot available
Highlights
JK Taps are straight flute general purpose taps, which can be used for both, machine or hand rougher and finisher. These taps are most economical to use on production runs, but are best on materials that produce chips or where the swarf breaks readily. Hand Taps can be supplied in sets of two rougher and finisher in serial thread form.
- These Taps are usually Supplied in Set of Two - Rougher and Finisher in Serial Thread Form.
- For BSPT : Recommended Drill Taps Sizes above are as per BS 949 Part 1
Features:
- Manufactured with premium quality HSS Steel
- Improved cost per component
- Taps are heat treated with advanced heat treatment technology giving it consistent quality
- Taps are produced on advance CNC machines which deliver accurate and consistent geometry.
Tap Drill Size:
| Tap Size (Nominal Dia x Pitch) | Drill Dia (mm) |
| 1/8"x 28 | 21/64 |
| 1/4"x19 | 7/16 |
| 3/8"x19 | 37/64 |
| 1/2"x14 | 23/32 |
| 3/4"x14 | 15/16 |
| 1"x11 | 1-13/64 |
| 1-1/4"x11 | 1-33/64 |
| 1-1/2"x11 | 1-3/4 |
| 2"x11 | 2-3/16 |
Please Note that Products may differ eg. colour, size from the product Image displayed on website. Kindly check the specifications provided to make better purchase decision.
Specifications
| Diameter (inches) | 1/8 inch |
|---|---|
| Thread | BSPT |
| Material | High Speed Steel |
| Thread per Inch | 28 Inch |
| Basic major Diameter of Thread (D) | 0.383 mm |
| Diameter Large End | 0.3986 mm |
| Diameter Small End (Before Chamfering) | 0.3518 mm |
| Thread Length (L1) | 3/4 mm |
| Overall Length (L) | 2.1/8 mm |
| Shank Diameter (d) | 0.318 mm |
| Square (Size: a) | 0.238 mm |
| Square (Length: L2) | 5/16 mm |
| Pack Qty | Set of 2 Pcs (Rougher and finisher) |
| Standard | For BSPT: Recommended Drill Taps Sizes Above Are As Per BS 949 Part 1 |
