JK 9/16 Inch UNF HSS Thread Hand Tap (Set of 3 Pcs), 9110042
Roll over the image to zoom in
Key Features
- Product Type: Hand Taps
- Diameter (inches): 9/16 inch
- Thread: UNF
- Material: High Speed Steel
- Thread per Inch: 18 Inch
ToolBuy Benefits
- Secure Payments
- Order Tracking (opens in a new tab)
₹2,929 (Incl. of all taxes)
₹2,482 + ₹447 GST (18%)
MRP was MRP ₹4,512
Save 45%
3 Business Days
3
–
Download Product LeafletNot available
Download Jk CatalogueNot available
Download Jk CatalogueNot available
Highlights
JK Taps are straight flute general purpose taps, which can be used for both, machine or hand tappiring. These taps are most economical to use on production runs, but are best on materials that produce chips or where the swarf breaks readily. Hand Taps Taper, Second & Bottoming in Non Serial form with Thread form.
- These Taps are usually Supplied in Set of Three - Taper, Second & Bottoming in Non Serial form with Thread Tolerance Class 2 (Zone 3) Unless other wise Specifield.
- For UNF : Recommended Drill Taps Sizes above are as per BS 949 Part 1 Class 2.
Features:
- Manufactured with premium quality HSS Steel
- Improved cost per component
- Taps are heat treated with advanced heat treatment technology giving it consistent quality
- Taps are produced on advance CNC machines which deliver accurate and consistent geometry.
Tap Drill Size:
| Tap Size (Nominal Dia x Pitch) | Drill Dia (mm) |
| No. 6 x 40 | 2.90 |
| No. 8 x 36 | 3.50 |
| No. 10 x 32 | 4.10 |
| No. 12 x 28 | 4.60 |
| 1/4 x 28 | 5.50 |
| 5/16 x 24 | 6.90 |
| 3/8 x 24 | 8.50 |
| 7/16 x 20 | 9.90 |
| 1/2 x 20 | 11.50 |
| 9/16 x 18 | 12.90 |
| 5/8 x 18 | 14.50 |
| 3/4 x 16 | 17.50 |
| 7/8 x 14 | 20.50 |
| 1 x 12 | 23.30 |
Please Note that Products may differ eg. colour, size from the product Image displayed on website. Kindly check the specifications provided to make better purchase decision.
Specifications
| Diameter (inches) | 9/16 inch |
|---|---|
| Thread | UNF |
| Material | High Speed Steel |
| Thread per Inch | 18 Inch |
| Thread Length (L1) | 25 mm |
| Overall Length (L) | 90 mm |
| Shank Diameter (d) | 11.20 mm |
| Square (Size: a) | 9.00 mm |
| Square (Length: L2) | 12 mm |
| Pack Qty | Set of 3 Pcs (Taper, Second & Bottom) |
| Standard | For UNF: Recommended Drill Taps Sizes Above Are As Per BS 949 Part 1 Class 2 |
