The detector detects the presence of voltage from 80V ~ 600V & 3KV ~ 33KV in AC lines. An elongated insulation rod permits the checking of high-tension circuits at a safe distance for voltage. The equipment is compact, lightweight, and easy to handle, and is also available for voltage detection in low-tension circuits..
Features:
- Telescopic, Compact, light-weight and handy
- High-voltage detection: The equipment, whether in stretched state is available for voltage detection in high-tension circuits (3.3kV, 6.6kV, 24KV & 33kV) whether the wires involved are naked or insulated.
- Low Voltage Detection: The equipment can be used for voltage detection in low-tension circuits (80V ~ 600V) by holding the nameplate portion of the detecting head. Before-use check can easily be done by plugging in an AC 100V plug socket, without using a tester.
- Easy to recognize indication: Intermittent lighting in red of a high-intensity light-emitting diode and intermittent audible sound of an electronic buzzer are readily recognizable at a full daylight, noisy location.
- Waterproof: The detecting head, being tightly enclosed, is free from any trouble due to dust, dirt, or water.
- Working Voltage Range - H.V: 3kV ~ 33kV AC (Hold grip portion to detect) / L.V: 80V ~ 600V AC. (Hold the nameplate portion to detect)
- Operation Test (Initial Voltage): When stretched, hold the grip portion. Put the sensing tip in contact with the voltage: 250V AC ± 50V the LED and buzzer should work. / When retracted, hold the nameplate portion. Put the sensing tip in contact with the voltage: 80V AC or below the LED and the buzzer should work.
- Operation start distance: Distance at which operation starts when front metal is brought near dia 5mm O. C. Wire with grip portion held by hand. Where 24 kV / dia 3mm (voltage to ground) @ 20 cm. Where 6.6 kV / dia 3mm (voltage to ground) @ 3 cm. Where 3.3 kV / dia 3mm (voltage to ground) @ 1 cm.
- Dielectric Strength: Between Sensing tip ~ Grip portion : 50kV AC, 1 min(The detector has to be stretched) / Between Sensing tip ~ Nameplate portion : 4kV AC, 1 min
- Construction: Waterproof (detecting head impervious to water).
- Insulation resistance: Between Sensing tip ~ Grip portion: (The detector has to be stretched) The insulation resistance is more than 2000MΩ @1KV
- Between Sensing tip ~ Nameplate portion: The insulation resistance is more than 2000MΩ @1KV
- Leakage Current Test: Put high voltage on the parts listed below Between the Sensing tip ~ Grip portion: 50kV AC, 1 min(The detector has to be stretched) The leakage current has to be 100μA or less than 100μA. Between Sensing tip ~ Nameplate portion: 4kV AC, 1 min. The leakage current has to be 100μA or less than 100μA.
Safety:
- Meets EN61010-1 EN50081-1 EN55082-1 EN55022 EN61000-4-2 EN61000-4-3
Package Content:
- Voltage Detector
- Instruction manual
- Carrying Case
Please Note that Product may differ eg. colour, size from the product Image displayed on website. Kindly check the specifications provided to make better purchase decision. M.R.P Prices and specifications are subject to change without notice.
